PArth Code

I am looping through a set of 16 IDs and assigning a eventListener to each I am doing I want to send a number to my php file (1 for first ID, 2 for others, etc, etc.), but it seems that i is more dynamic than I want. Each ID sends 17 . Get an internal element by klasses.forEach (function (klass) {var svgElement = svgDoc.getElementById (klass); // id svgElement .addEventListener ("mouseup", function () {$ $ ("#modLSpan"); .ax ((type: "POST", url: "buildService.php", data: {"service": i}}). (Function (msg) {alert (Layerre [i] ) .HTML (msg); $ ("# modmodal"). Modal ();})}}); i ++;}); How can I set each to a specific number? I have also tried: var lameArray = [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, 16]; ... data: {"service": lameArray [i]} Code> I ? The problem is that i is a global variable, or a variable outside circle for , so when the mouseup event begins The element in the value i ...

संभव डुप्लिकेट: import pytz, datetime pytz.timezone ("एशिया / कलकत्ता") प्रिंट करता है: & lt; DstTzInfo 'एशिया / कलकत्ता' एचएमटी + 5: 53: 00 एसटीडी & gt; यह 05:30 बजे क्यों नहीं है? मैं समय क्षेत्र अमेरिका / लॉस_एन्जिल्स में हूं। वर्षों में समय क्षेत्र बदल जाता है। उस क्षेत्र के लिए मूल ऑफसेट के अनुसार 5.88888888889 घंटे, या 5 घंटे 53 मिनट। pytz एक वास्तविक दिनांक को क्षेत्र को असाइन करने के बाद उचित ऑफसेट और नामकरण का उपयोग करेगा। & gt; & gt; & gt; Tz = pytz.timezone ("एशिया / कलकत्ता") & gt; & gt; & gt; Tz & lt; DstTzInfo 'एशिया / कलकत्ता' एचएमटी + 5: 53: 00 एसटीडी & gt; & Gt; & gt; & gt; Tz.localize (datetime.datetime (1 9 01, 7, 10, 12, 0)) datetime.datetime (1 9 01, 7, 10, 12, 0, टीज़िनफा = & lt; DstTzInfo 'एशिया / कलकत्ता' एचएमटी + 5: 53: 00 एसटीडी & gt;) & gt; & gt; & gt; Tz.localize (datetime.datetime (2012, 7, 10, 12, 0)) datetime.d...

Hello, I have some custom functions wrapped in a jQuery document. Most of these functions are used within that function and work, but this is the case where I want to use the function contained in the field from the global field. how can I do this? No, but you can name the function and send it to .ready () : var myFunctionName = function (params) {// Do things} // Function ready for callback (document) for jQuery .ready (myFunctionName); // Access directly to any other function like: myFunctionName ('paramaters');

संभव डुप्लिकेट: यह बहुत आसान होना चाहिए मैं कॉपी करने के लिए नहीं & amp; यहां मूल छवि स्थान है: चित्र / फ़ोल्डर / एक .jpg यह वही है जो मुझे चाहिए: चित्र / फ़ोल्डर / one.jpg one_thumb.jpg इसे कैसे प्राप्त किया जा सकता है? आप देख सकते हैं कि मैं सिर्फ एक मौजूदा फ़ाइल / छवि का नाम नहीं बदल रहा हूँ मैं इसे प्रतिलिपि बनाना और इसे उसी निर्देशिका में नाम देना चाहता हूं। बस प्रतिलिपि विधि का उपयोग करें: Ex: & lt;? Php $ file = 'images / folder / one.jpg'; $ Newfile = 'छवियाँ / फ़ोल्डर / एक_थंभ.जेपीजी'; यदि (! कॉपी ($ फ़ाइल, $ नईफ़ाइल)) {प्रतिध्वनि "कॉपी करने में विफल"; }

The UI of my web app is mostly built with excellent knockout.js. This is showing some layout errors in IE8 under IE7 compatibility mode. I've tried to add a meta tag to force the benchmark mode: & lt; Meta http-equiv = "X-UA-Compatible" content = "IE = edge" /> However, in IE 9 under IE 9 compatibility view (which I believe to be) That some users will be set) This causes an error when knockout bindings it: DOM exception: INVALID_CHARACTER_ERR (5) I get lots of reference to this error on the net Got it - the way DOM elements have been created - but obviously I'm not controlling it, is a knockout. To render all current and future versions of IE to render in standard mode, there is a strong and minimal way to make Hamy method, which makes Knockout.js DOM Is also compatible with? Apart from this, any knockout.What can be expanded on what JS is doing here, which does not like IE9? thanks a lot. Update: I have separated at least one prob...

According to the instructions and specifications I mentioned, I am using a PRF file to automate setup of users in Outlook I here:. A GPO property has been created to pre-configure the user's Outlook account with their original details (using the aforementioned PRF file), when they log on to a computer for the first time. I would like all users to enter their password in the username / password prompt when they first open Outlook. However, it is not happening Outlook is trying to connect to the mail server without prompting the user. I suspect because this account is being created with the 'Remember password' check. Since there is no password, the connection is failing. The email account is setup for the first time, so how can I decide that this option will be 'unchecked' by default? In PRF file there is a property in Section 6 (mapping for profile properties) that looks closer to: RememberPassword = PT_BOOLEAN, 0x6606 But I do not know what to do wit...

OK, I have a long list of packet size, which needs to be rewritten, and I do not I want to do so by hand, so I am going to create a program for this. Public stable out-of-order packet aClass198_1993 = new out-cumming packets (68, 8); This is an example of one of the examples, what I have to do, he gets the program to go to 68, it stores it in packet string, and number 8 Public class, PacketSizeFixer {public static final string IN = "./out/OldPacketSizes.txt" "Public Stable Last String Out =" ./ Out / packetSizesFormatted.txt "; Public Static Zero Main (String [] AGR) throws IOException {BufferedReader Reader = New BufferedR Eader (New FileReader (IN)); BufferedReader Writer = New BufferedReader (New FileReader); String Line; String Packet Size; While ((Line = Reader. Readline)! = Null) {packet = line.substring ( Line.indexOf ("new output packet", line.indexOf (",")); size = line.substring (line .indexOf (","), line.inde...

NSArray * mruSearchItems; NSMutableArray * mruItems; Self.mruItems = [[NSMutableArray alloc] initWithArray: [[NSUserDefaults मानक उपयोगकर्ता डीफॉल्ट] arrayForKey: @ "खोजों"]]; । । इस बिंदु पर mruItems खाली हो जाता है । । Self.mruSearchItems = [[NSArray alloc] initWithArray: self.mruItems]; अंतिम पंक्ति एक दुर्घटना का कारण बनती है। EXC_BAD_ACCESS ऐसा क्यों है? डॉट नोटेशन सिंटैक्स ( self.mruSearchItems ) का उपयोग करने में सक्षम होने के लिए आपको mruSearchItems; अगर आपके पास पहले से कोई संपत्ति है (और इसे यहां नहीं दिखाया है) सुनिश्चित करें कि यह मजबूत है (नहीं कमजोर ) अन्यथा आपके arrays को रिहा किया जाएगा।

? Public class I can get an example of how to use work side effect files LongWritable, Text, Text, IntWritable & gt; {Public Zero Map (LongWritable Key, Text Value, OutputCollector & LT; Text, IntWritable> Production, Reporter Correspondent) Map0t MapReduceBase Implants Mapper Expands IOException {IntWritable A = New IntWritable (1); StringTokenizer tokenizer = New StringTokenizer (value.toString (), ","); String x; String wi; String jade; X = tokenizer.nextToken (); Y = tokenizer.nextToken (); Z = tokenizer.nextToken (); Output.collect (new text (x + "+ z), a);}} In a separate folder in HDF, the new text in the above mapper function + + +, I want to write new text. I searched, but could not find any examples from how to use work side effect files. Pls help me. Thanks in advance! is not an optimal approach But a By the way I can think that is open in a file format (in the setup), write in the HDFS, and then map the file in clean (then cl...

I am working on a project that has been cited in the journal article how to analyze. I have a big file in the name of the journal article. I try to pass them to Google Scholar and see how many testimonials each has. The strategy I follow here is: Use "scholar.py", it is a previously written Pyro script that Google Scholar Searches and returns information on the first hit in the CSV format (including the number of quotes) Google Scholar blocks you after a certain number of searches (About 3000 article titles for my query ) I have found that most people use tow (and) to solve this problem Tow is a service that lets you find random IP every few minutes to do. I have successfully set up and working both scholar.py and tor I am not very familiar with dragon or library urllib2 and am surprised that for scholar.py What changes need to be made so that questions can be made through Tor. I also approach an easy (and potentially quite different) large scale Google Sc...

I am exporting the variable from the shell script into an EXC. Program is below export name = "hi" eval $ (awk '{element = "bye"; name = element "name"; print name}' 'resonant $ name What is my approximate output, I need to insert name with element inside AVC script and then display consistent results out and therefore my output will be name = byehi But I can not find the same. Can you please please PPP please help me about this You can specify variables with no-v option without having to export anything to the environment. For example: name = 'high' name = $ (awk -v name = "$ name" 'BEGIN {print' bye name} ') "$ name" echo This will return byehi as expected.

I am using an ELS function which moves: optimization (Std :: vector This edits the input. How should I cross a vector on this, I've tried: std :: vector> double> input> Input.push_back ('multiple points'); optimize (input); There is a linker The error is: Undefined reference to undefined (standard :: vector & lt; double; standard :: allot R > If I try this: std :: vector Then there is a compile error: 'Input; Input.push_back (' multiple points'); 'Is declared as a reference but is not initial How do I start a context of vector or do I am doing something wrong? Edit: I did not add the library correctly to my CMakeLists Was ha. Thanks for everyone's help, I want you to mark all of them as correct. Your first way to pass is correct. The compiler accepts that the function is passed by reference from the signature in the vector header, makes reference to your vector, and passes it in the function. The ...

Has anyone managed to use expire_page with Serial Stack? I have backed up with support which is unproductive. By my trial, it works with a single witch, but when you have multiple dyons, only one page will end. Therefore, this will sometimes serve the old page. I know the varnish was an option in the previous stack but what is the HTTP cache solution for fir? Right now I'm just using expir_action with memcached, but it is not as good as it still kills the railroad stock. Thanks in advance. rack :: is the answer to the cache. Using the header, you can use last modified to end pages. I will probably use this except for expire_action. Here is the tutorial on this: This is not correct because I think the request will still be queued but it is better than nothing

Is there a way to open a test app's database in the iPad for me? I need to manually insert data for a few reasons, so is there a way to do this? Yes, there is a way that you can open the database. The file location should be as follows: Home / Library / App Support / iPhone Simulator / User / Application / Based on how you want to view it I recommend checking either that

I'm trying to set it up for the last few weeks, but without success, How can I add 2 block codes? Private int entries = 6; Private string phonenom []; Private string button label []; /** Called when the activity is first created. * / @Override Public Zero onCreate (bundled savedInstanceState) {super.onCreate (savedInstanceState); SetContentView (R.layout.main); Phonename = new string [entries]; Buttonelabel = new string [entries]; // Data Array PopulateArge (); // Set up the button and click the Listen button Button 1 = (button) Find ViewById (R.id.button1); Button1.setText (buttonLabels [0]); Button1.setOnClickListener (this); Button Button 2 = (Button) Find ViewById (R.id.button2); Button2.setText (buttonLabels [1]); Button2.setOnClickListener (this); Button Button 3 = (Button) Find ViewById (R.id.button3); Button3.setText (buttonLabels [2]); Button3.setOnClickListener (this); Button Button 4 = (Button) Find ViewById (R.id.button4); Button4.setText (buttonLabels [3]); Butt...

When I want to type the name of a list item (list box populated by files in a directory), for example, If I type by pressing "Apples" I will take the first object with A on the name of him, but after typing "P", I will take the first item with P as the first letter. Is there any way I can do this so that I can type some letters and that will take me to that specific item? For example, may be in the list; "Boring", then "idea" P> Any help is appreciated. Thank you. I think it is possible to create a system. Windows.form.listbox behaves like that , But it will take some non-trivial code to work this. This behavior is built-in in System.Windows.Forms.ListView, so I can suggest using ListView instead of ListBox. Look like a list box to see the list list. Me.ListView1.View = See.Example Me.ListView1.HeaderStyle = ColumnHeaderStyle.None me.ListView1.BeginUpdate () Try 'System.Window.Form.Listview does not have data binding ca...

I have 2 problems: In my ANTLR parser, I have this light rule: Message: msg_content (COMMA msg_content) * - & gt; ^ (MSG_CTS msg_content +); In my grammar tree, how can I use the collected msg_content tokens? $ Msg_content.text is returning a blank exception. More generally, can you please provide me some guidelines, how can I use my zested AST tree? I basically want to walk on nodes and create Java classes for different things like I have this simple tree that prints: (MSG (agent) For some Java class "agent" I have fields with "A", "B" and some content fields, which are X, Y I have seen: "Interfacing AST with Java" and "Expression Evaluator" from the ANLR Online Manual, but I do not get enough to implement them for my problem if you can provide a simple example. If so, it would be very useful! Please help ... Thanks! View all the included rules and code It is impossible to leave without comment. IME...

यहां विधि है सार्वजनिक स्ट्रिंग testFile (int Numofpunches, स्ट्रिंग फाइलनाम, इंट चित्र, इंट रद्दपिक्स) {स्ट्रिंग स्ट्रिंग = ""; बूलियन ए; FILENAME = फाइलनाम; {FileInputStream fis = openFileInput (फाइलनाम) का प्रयास करें; कोशिश {इंट काउंटर = एफआईएस.रेड (एमआईआईडी, 0, एनएमफपन्चे); fis.close (); Int i = 0; जबकि (i & lt; काउंटर) {if (mIds [i] == 'c') {mTHhumbIds [i ++] = तस्वीर; //R.drawable.crab; स्ट्रिंग = string.concat ( "सी"); } अन्य {एमटीहम्बइड्स [आई] = रद्द करें; स्ट्रिंग = string.concat ( "एक्स"); इमेजिव्यू पेंचिट = (इमेजव्यू) ढूंढिए वीवीआईबीआईआईडी (माइपुनें [आई ++]); punchit.setImageResource (R.drawable.punchboxcancelled); }} स्ट्रिंग टेस्टफोर्डोन = "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"; A = string.equals (testfordone.substring (0, numofpunches)); यदि (ए) {वापसी "किया"; }} पकड़ (IOException ई) {}} पकड़ (FileNotFoundException ई) {try {// प्रारंभ स्ट्रिंग FILENAME = filename; FileOutputStream fos = openFileOutput (FILENA...

I have a problem here. I have created a special careerfield java - an enum square which will list some special characters. Special Protected Field. Java package bp.enumfield; Public Emma Special Character Field {+, #; } In my eclipse on this line: Public Enemy Special Character Field { there is an error in it: it says: Syntax error, Completing EnumDeclaration Please enter "EnumBody" for Please help in advance thanks. Do something like this, public enum Special Character Field {PLUS ( "+"), Hash ("#"); Private string value; Private Special Character field (string value) {this.value = value; } Public string toString () {return.value; // it will come back, # or +}}

I'm using Knockout.js to create most of my UI and I have a streamlined way of selecting text Looking back at any input [type = text] on focus I have done such a thing in the past: $ ('input [type = text]'). Click (function () {$ (this). Select ();}); But under the knockout paradigm, new input is being created and removed in response to the model changes of my thoughts. I do not want to do too much procedural stuff to force handlers again for new elements, I do not want to force clicks for every input input in my template, and I really do not want to use performance and other drawbacks Due to the whole document see jQuery's Live. These inputs can be displayed at all levels in my template hierarchy, to respond to changes in the model of my thoughts and to transparently adopt the child's input in any of the new DOM structures created by Knockout Is there a clean way to hook? You can write your own custom binder which does this for you, look at how Do it....

I am a newbie with database applications I paginate with low memory footprint I want to apply This application is connected to MS SQL Server 2008 R2 DB. I have thousands of records and this application can check the records with the given criteria. The application will be returned using the LINQ-SQL for the query and the entire data will be returned. If the query returns too much, then this process can be removed from memory so I would like to apply it as pages I came across some stored procedures on the Web that can page data. I'm not sure that marking on the standard page can help me fulfill the following requirements Reduce the memory footprint, only to give the necessary results on demand is. Maintain the query status. The same record can be updated, while the user sees the data in view. Therefore, regardless of the current status table of the state, the number of results and the number should be maintained in relation to it. If LINQ is used to apply the pa...

I want to change the default action of a controller depending on which user is logged in. Ex My site has two users: Publisher and Author and I want to set the publisher's action as a default work in the form of a publisher, and also for the author. What should I do? When can I check my roles and set up my related tasks? Another way to do this is to some extent in its controller like this: & lt ;? Php class extends the MyAwesomeController controller {// or spreads to CController based on your code init () {parent :: init (); // There is no need for this call if your parents do not have anything init (), if (array_key_exists ('RolePublisher', Yii :: app) - & gt; authManager- & gt; getRoles (Yii :: app) - & gt; user- & gt; ID) $ this- & gt; Default action = 'publisher'; // Your action name and name (array_key_exists ('RoleAuthor', Yii :: app) - & gt; authManager- & gt; getRoles (Yii: app () - & gt; User- & g...

What can I tell when Ajax hates if CIS profiler is enabled because it is in view Injects html at the end of the method. Which corrupts with success: callback $ Ajax () . Instead of defining my idea, $ this-> Output-> Enabled_profileor (wrong); On all the methods used for AJAX calls, I can use the following code in a hook or core controller which extends the CI_Controller .. or elsewhere, not to make sure where it is placed Go. & lt ;? Php if ($ this-> Input-> is_ajax_request ()) {$ this- & gt; Output->; Enable_profiler (wrong); } Question: I can add the following code, which can be disabled by the CI to the profiler if it is enabled only for AJAX requests Areas will be effective globally. If the course is a better solution, let me know but Google does not tell anything. Please expand the main controller and construct a particular post for the variable name in the constructor's check in the array and Disable profiler. Expands clas...

What is a way to access routes through a program (without calling via http) For example: (Main routes (post / "query" "OK ... ...")) Can I use a "query" function which is generating metro is? defroutes creates a ring handler with the same name that you have it did . So basically you have a ring handler, which is a simple task that takes a request map and gives a feedback map. In your case, you have the function main-routes the appropriate ring request map object which has the uri key, which it will send to the "/ query" handler function being given.

After I am trying to find out the Byzantine process for uploading an app on Google Play. I need to create my app using PhoneGap's appreciated system, and to make the system a "release build" for me, I have a "keystore" generated, needed. However, there is nothing on this about when I look at Google's own "keyStore" I have a "keystore", which theoretically uses Ubuntu, Which is what I am using should be worked on to get it done. keytool one ???? Genkey One ???? V one ???? Keystore just2try.keystore one ???? Aka someKindOfName one ???? Keyalg rsa a ???? Validity 10000 First of all, what should I say, where is it someKindOfName ? My app's name? In any case, when I run it, I get this response: keytool error: java.lang.RuntimeException: use error, a ??? ? Genkey is not a legal order I am on a solution to Google, but only people I found were for Windows. Can anyone provide me, or point to, this "keystore...

सार्वजनिक शून्य सेटपर (विंडो पैरेंट) {if (true) {this.parent = ((abc.InvestRegPropertySeize) माता-पिता); } Else {this.parent = ((cde.InvestRegPropertySeize) माता पिता); }} उपरोक्त में जब मैं इस कोड को संकलित करता हूं, तो इसे सफलतापूर्वक संकलित किया गया है और अनुपालन के बाद मैं 'cde.InvestRegPropertySeize' की क्लास फाइल को मैनुलली हटा देता हूं और जब मैं इस कोड को follwing त्रुटि को चलाने की कोशिश करता हूं हो रहा है। NoDefClassFoundError of'cde.InvestRegPropertySeize ' लेकिन मुझे लगता है कि ऐसा नहीं होना चाहिए क्योंकि शर्त हमेशा सच है और' सीडीई की कोई ज़रूरत नहीं है। चलने वाले समय में इन्वेस्टराइजप्रॉपर्टी साइज़ 'क्लास फ़ाइल, तो ऐसा क्यों हो रहा है कृपया मुझे समाधान बताएं। एक ही रास्ता ऐसा कुछ करने के लिए उपयोग करके है। अपने कोड में दो डाट निकालें, इसलिए वर्गों को रनटाइम पर हल नहीं किया जाएगा। फिर क्षेत्र और कॉल विधियों तक पहुंचने के लिए प्रतिबिंब का उपयोग करें। प्रतिबिंब शक्तिशाली है, लेकिन कोड बहुत पठनीय नहीं है और यह कुछ प्रदर्शन ओवरहेड के सा...

I am trying to understand the loop to work in a particular case, if someone can explain it Will help me Well, what I am doing is downloading email from a mailbox (like 50 at a time) to Hotmail (I am using the MailBEE.NET object for that) on the download I am saving some things like sender's name, attachment name (if any) database and so on ... this is a fairly long process on which the fact is that the program must first log in to Hotmail server, then Download the message and then in DB Run a query to save the content. My question is, if the task is to be defined in a separate assembly (DLL) to do all this work and the calling program is a web based application that is using this assembly in context, So what if I keep this function in these calls for loop? Wait for the loop to end the function? Or will it keep calling this function at times? What better way to suggest you do this work? Thank you. It depends on how you write the code that downloads. If only one meth...

In my company, we are developing against a local server, we do not keep a copy of the file-base on our personal We can not work remotely efficiently Search the file (Find + Quick Search in Netbusiness, which I use a lot) is very slow. What option do I have for getting the source code to protect it from theft / hackers that can keep my laptop handy or not? I recommend because it works on Windows and Linux, free, open-source, and work Does. It encrypts / decrypts on fly, without any temporary "plain text" files. You can simply create an encrypted container or encrypt an entire drive, but I suspect that a file container is enough in your case, because you only have the source code (i.e. httpdocs folder) Need protection There is an option to automatically load the container when the computer (Windows on WIN + L) is locked, so when you leave your laptop (for example, instead of the client ) So you will be safe immediately. One of the select encryption ...

I am using FluentValidation with MVC 3.0; I have configured this to work with a custom validator factory and IOC container; Everything works fine and I am able to do custom verification with my dependence and inject them ... but a strange thing has happened: all the strongly typed ideas on which I HtmlHelper control is created (ex: HTML .Editor), it seems that MVC is trying to illustrate a verifier that does not need any check to see if I have models in those sequences, and no validator Models have been mapped to unity, because it is a unity error ... valid, and no automatic model is binding, so how can I stop it from happening? I do not have to register for unity in order to make the vacant valid for each model and get rid of these errors. How do I register in the factory at the global level here: FluentValidationModelValidatorProvider.Configure (provider = & gt; {provider.ValidatorFactory = new UnityValidatorFactory (container);}) ; Data AnnotationModelValendarProvisor...

I have tried to fall into a temporary directory and it's running as a remix: Sudo Ruby bz2redmine.rb ... but I get an error: /usr/lib/ruby/1.9.1/ Rubygems / custom_require .rb: 36: `Requirement ': Can not load such a file - /usr/lib/ruby/1.9.1/rubygems/custom_require/1/1/1/rubygems/custom_require.rb36: bz2redmine From rb: Setting from 'Requirement' (Load Errone): 29: `& lt; Main & gt; 'In the settings.rb file is in the same directory as the bz2redmine script. What am I missing? to be a bug in the migration script:

I have tried to combine the answer with several threads, but not my very new, less-developed ASP.NET skills The ball is playing. I am trying to make a to-do list. Follow the specifications: On page load, in the gray there should be an input text box with 'add task' and a submit button next to it. The text is added to the text box and the submit button is clicked, a check box appears below for which the text input box is user input On the right side of the check box that appears, a 'Delete' button should also be visible which will get rid of both check boxes and deletion buttons. When the checkbox is checked, its text must be crossed (strikethrough). On browser refresh, all operations must be missing. (And it is a big problem for me) No database is used. I want to be very grateful for some points, even what model should be used (WF, MVC, Razor ...) ... Thank you in advance for your time! You can put a check box in a panel, and you ...

Then, takes a key (height) time, how much time it takes to find all the nodes with the key Compared to the given key? What are the constant factors? If this is done properly, then you will probably get the key, and then the next one -Order Then it will be O (Logan) + m where the number of worms is greater than m key. The worst case will be o (Logan) + n = o (n)

I have HTML that contains some Unicode characters, and saved in "UTF-8" in the disk. I can use less to display it, all the characters are displayed well: & lt; H1 & gt; One "?? Ĺ ?? Æ ?? Action? & Lt; / H1> & Lt; P & gt; Playç¨ ?? ź ?? Æ ?? ¥ æ ?? ¶å ?? Degree celsius ŧ§Ã ?? One ???? E. æ ± ?? I ¼ ?? É ?? ½æ ?? C ?? ± & LT; Code & gt; Action & lt; / Code & gt; Æ ?? ¥ å¤ ?? Ç ???? Ç ???? à ???? But when I use "wkhtmltopdf" to convert it to PDF, it shows broken letters: My order is: wkhtmltopdf - encoding utf-8 book. Html book.pdf how to fix it? Finally I found the reason: I do not have Unicode fonts in my ubuntu server P> I upload some TrueType fonts from my local Ubuntu server, everything works fine. Freewind: / usr / share / fonts $ cd truetype / freewind @ freewind: / usr / share / fonts / truetype $ ls arphic ttf-dejavu ttf-lao free font ttf-devanagari -fonts ttf-liberation kochi ttf-hin...

I have developed a sample app in Visual Studio 2010. I have created an empty SharePoint project and have given the local site URL for debugging. A visual webpart was checked and checked as a trust level of SharePoint solution, "Deployed as a firm" and added a class for solution. I'm able to create and run applications using Visual Studio. SharePoint is using SharePoint Foundation 2010 in my local machine to debug the application. Now I want to deploy this application in SharePoint Server 2010 which is in the virtual machine. 1. I have copied the .wsp file of the application created for the virtual machine. 2. I created a web application and site archive from the central administrator in VM. 3. Then use Site Actions - & gt; Site Settings - & gt; Solution (gallery), to upload. Choose Wsp file. "Warning: If you believe this solution, then you should only activate this solution. An active solution can read, modify, and delete your data." And active buttons a...

I'm new to Android gaming, the development I'm using is engine's wigenin. I want to know that How can I destroy a layer with her child? I thought how to do it This will remove the children of the layer layer. Removes AllChild (true); And it will remove this layer with your children. RemovesChild (layer, true);

I have an API that takes a number as string input and I need to get float value of numbers I currently float to get the float value of my string number Using the flowflot method. According to , this is nothing about input which is more than float. MAX_VALUE I was thinking about doing this by checking the length of the input in a manner that is more than the length of the string float. MAX_VALUE Pls suggest how I can go about dealing with this. Although javadoc does not clarify it, when I tested it, the parstrot of the string is very large, just produced a float of 'infinity' You can use theInInFin () method after the creation to check the value . Some things like BigDekel probably will be a safe option here, especially if you make an arithmetic on your value.

निजी उप btn_ok_Click (ByVal इस System.Object के रूप में, ByVal ई System.EventArgs के रूप में) btn_ok.Click mysqlconn हैंडल .Open () cmd.CommandText = cmd.Connection = mysqlconn डॉ = cmd.ExecuteReader dr.Read () "लॉगिन से चयन *" txtuser.Text = "" और txt_password.Text = "" तो फिर MsgBox ( "उपयोगकर्ता डालें तो नाम और पासवर्ड ", MsgBoxStyle.Information," लॉग इन फार्म ") वरना तो txtuser.Text =" "तो फिर MsgBox (" लॉग इन फार्म "" कृपया उपयोगकर्ता नाम का चयन ", MsgBoxStyle.Information,) वरना तो txt_password.Text =" "तो फिर एमएसबीबॉक्स ("कृपया पासवर्ड दर्ज करें", एमएसबीबॉक्स शैली। सूचना, "प्रवेश प्रपत्र") 'यदि (डॉ। फ़िल्टकाउंट & gt; 0) तब' मैं 'के रूप में पूर्णांक = डीआर (1)' I = 1 के लिए 'dr.FieldCount' user = डॉ ( "उपयोगकर्ता") ToString 'पासवर्ड = डॉ ( "पासवर्ड") ToString elseif ((txtuser.Text =।'। "& amp; txt_usern...

I added a new "item page" in my win8 app project to display images with descriptions of the design In, I am able to see all the objects with images, but when I debug and navigate the page, page breaks can anyone tell me the solution? I had only one problem (any attempt to use frames) in the same accident Help with creating a new project with content (!) ...

So I have a script that pulls information from event webpage URL: This is PHP The script is calling a Python script (part of its loop): $ {"tmp" $ I} = utf8_encode (exec ("Python myscrape.py $ {" EU ". $ I } ")); This is the Python script that passes a URL: # - * - coding: UTF-8 - * - Import system URL = sys. Argv [1] # $ url = 'http://everguide.com .u / Melbourne / Event / 2012-Jul-14 / Color /' import urllib2 req = urllib2.Request (URL) response = urllib2.urlopen (req) Html = response.read () Beautiful soup soup = beautiful soup (html .decode ('utf-8') from Sundasubup import) soup.prettify () Import import to node for soup again. (All itemprop = "name"): n = '' .join (node.findAll (text = True)) Soup.findAll for node (itemprop = "url"): v = '' .join (node.findAll Text = True)) soup.findAll ("div", {"class": "time"}) for node: d = ''. For nodes (node.f...

I have a problem with the softgrid class: In my project I have a class that extends vertical panel initWidget method, then send me a simplegrid in the text-post "itemprop =" text "> Strong> simplegrid can not be seen (this data loads but does not display). I know that by calling initWidget the problem is solved because a few days ago my class overall was increased instead of overall and everything Worked fine Do anyone know how to call initWidget to display a simple grid? Overall There is only one cover for another widget. For example, you can wrap the vertical panel and add two Labels widgets to it, to display a title and other related data bottom. The Composite widget should know which of these other widgets should be wrapped, and you can tell it in the initWidget (widget widget) method You can. You only have to call it once and only once, or you will get an error.

I use the jQuery.ajax function to make a GET request for the following asp.net webservice:

I use a Bluetooth device I connect to the device. But I have to know the seller ID, the producer. Is there any solution for Android to get it potential on the iPhone? To understand this, check it how you can do it. Page 10: "DI service record attributes are listed below." .. After the detailed specification you will find the table.

Sybase Sqlanywhere में सिस्टम उपयोगकर्ताओं को sys.sysuser में संग्रहीत किया जाता है। यहाँ से एक उदाहरण पंक्ति है उपयोगकर्ता के लिए 'dba' पासवर्ड 'sql' के साथ तालिका। user_id 1 object_id 175 user_name 'DBA' पासवर्ड 0x013819f1b5d5a9fd1ba98e5b999239277b6296bee4bc28653802cd103d50fa76141aef7500 login_policy_id 173 expire_password_on_login_policy_id 0 password_creation_time '2012-02-23 11:24 : 32.000 'fail_login_attempts 0 last_login_time' 2012-06-27 17: 33: 00.000 ' मुझे पता है कि पासवर्ड कैसे धोया गया है, या अगर कोई प्रक्रिया या फ़ंक्शन को जानता है Sqlanywhere में यूज़रनेम पासवर्ड संयोजन को प्रमाणित करने के लिए बुलाया जाता है। एसक्यूएल कहीं भी पासवर्ड एसएचए- 256 एल्गोरिथ्म, लेकिन ऐसा करने का सही तरीका अप्रकाशित है। संस्करण 16.0 या बाद में, आप वर्तमान उपयोगकर्ता के पासवर्ड को सत्यापित करने के लिए संग्रहीत कार्यविधि का उपयोग कर सकते हैं। यदि आप अलग उपयोगकर्ता के लिए एक पासवर्ड की जांच करना चाहते हैं, या यदि आप v16 से पहले एक सर्व...

Any1 plz help me ... In Android Already installed How to update APX in end user device .... Ask for the former: The Android Market App, which is installed in the device, has been completely converted to Googleplay APK. . How to do it .... Thanks in advance ... If you want to upload completely The new APK (like a whole new project) just keep signing the same key and the same package name (such as com.example.App) and it will update like magic.

Then I have this current bit code that is fully prepared in Visual Studio 2005, even though the target platform is 32 bit , It does not work in 64 bit. I do not understand why; In fact I've never seen a pointer before, is it the right C ++? # real-time real-time * point typed; Point * ptari; // (So this is basically double ** ptary?) Long arylen = (long) ptary [0]; Thanks in advance, it seems to work on 32 bit systems because both signal and long are 32 bit wide I fail to work on 64 bit systems, because the indicators 64 Bits are wide, but long (maybe) still only 32 bit wide. You can easily sizeof (double *) and sizeof (long) . My guess is that the 64 bit system will produce 8 and 4, respectively. If you need an integer type that is capable of keeping an indicator, then use intptr_t & lt; Stdint.h & gt; to े

I have a string where "special areas" are attached in a crisp brace: {IntIncG} / {intIncD} / 02- {yy} I need these through all these elements and they have to change based on their content. What is the best code structure to do in C #? I can not just change one place because I need to know the indicator of each "special area {}" so that the value to change it correctly. reggax rgx = new reggae (@ "\ ({[^ \}] * \ }) "); String Output = RGX Replay (input, new matchualumer (dustfum)); Stable string DoStuff (match match) {// Here you have access to the match. Indexes, and matches Value can do something different for match 1, match 2, etc. // You can easily close the value by string. Value = match. Value Sebstring (1, match value.length -2); // Then call a function, which takes value and index to be the string to be subscribed}

I have some modules that actually define RS services to MONODB for various organizations. 1) I can make connections in each module, var mangoes = ('mongos'); Mongoose.connect (mongoURL); 2) I can make a connection outside of a module and then pass it as a parameter What is the best way?

I am trying to compile some code on Sigwin which requires sendfile.h. When I try to compile, it gives me a fatal error: sys / sendfile.h: No such file or directory compilation is finished. How do I solve it? Do I have to go to a Linux platform? I have gcc4.5 installed on Sigwin. I Like the comment, sendfile POSIX is not, however, man page sendfile () copies data between a file descriptor and second. Because this copy is made within the kernel, sendfile () is more efficient by combining (2) reading and (2) writes, for which the user needs to move more data from the location. Which means that it has basically read a () after typing a () , then implement it yourself To be relatively easy.

I just need a regular expression that will validate the phone not entered in the text box. This textbox can only allow numbers, dashes (-) and plus (+) and can be up to 15 characters and a minimum of 11 characters. (+) Can (Optional) come only on starting the phone number. Please answer. The answer to your question is on: \ +? [\ D]] {1,13} \ +? means "a '+' character of zero" [\ d -] {1,13} means 1 to 13 digits or hyphen " However, I think that you should use some more instructions. At least 8 digits may be required and the hyphen can not be either first or last: ^ (? = (. * \ D) {8,13}) \ +? (?! -) [\ d -] * (? & Lt;! -) $

I have a form in which I am creating a figure, each line has a set of components and one of them : & lt; H: Selectiononeredio id = "chargweave" onclick = "alert (this.id);" & Gt; & Lt; F: Selection item item label = "charge" item value = "charge" /> & Lt; F: Selection item item label = "sorry" item value = "discount" /> & lt; / H: selectOneRadio & gt; I have added two links that trigger two similar functions: & Lt; / A & gt; & Lt; A href = "#" onclick = "allwiki ();" & Gt; & Lt; H: output text value = "skip all" /> & Lt; / A & gt; So when the user clicks on the link, then all charges / radiobatons should be charged. Before using the radio button (test purpose) one of the following codes, I always get the same error: $ ('# frmResults: billingRecordId: 0 : ChargeWaive: 0 '). Attr ('checked', true); $ (...

Is it possible to submit a full domain object, include the value? Let's say I have something like this: & lt; Input type = "text" name = "name" id = "name" value = "" /> The user once entered the name of the user (for example, "my name", I want to get the entire DOM object, so I will get it on the server & lt; input type = "text" name = "name" id = "name" value = "** my name **" /> I know I can send the entire intrinsic HTML, but I do not provide the values ​​given by that user. This is a form of hell There is a jib, but you can catch the whole body (or a portion via #id) using jQuery: one "??? $ $ (function () {$ ( 'Form') ('submit', function (e) {e.preventDefault (); var content = $ ('body') .HTML (); Alert (content);}}}}}; a ??? ?

I wonder if WordPress gives me the ability to add 2 fields (input and textarea) in Quick Edit Tags Code> Actually, you want to add these 2 fields to Quick Edit which edit tag pages , But I can use these 2 fields as quick edit so I can use them easily. code: // Add a dummy column 'Post' post for post type post add_filter ('manage_edit-post_tag_columns',' add_dummy_column ', 102); Function add_dummy_column ($ column) {$ columns ['headline'] = 'title'; $ Column ['intro-text'] = 'intro text'; Return $ column; } // But delete it again on the edit screen (on other screen?) Add_filter ('manage_edit-post_tag_columns', 'remove_dummy_column'); Function remove_dummy_column ($ column) {unset ($ column ['description']); Return $ column; } Function my_column_value ($ empty = '', $ custom_column, $ term_id) {include_once ('taxonomy-metadata.fp'); Return esc_html (get_term_meta ($ wo...

OK, I'm developing an Excel addin that changes the text in a cell, then it changes. I want to work on it like things are like full values ​​in axle when you can type a cell = ABS (YOurnumBER) and then it's the text of the cell The full value of your number will take place How do I set up Excel to add a custom option that would like to accept the string in a fashion like this, instead of = molem (YOURSTRING) It seems that you want to create an Excel user-defined function (UDF) using C # Are there. The best way to do this is to use the free library (which I develop). The code will be allowed from: [ExcelFunction (description = "My crafty work")] Public static string mole (string input) {return "you pass" + input; } = Molem ("some words") in your worksheet .

I have EditSite.aspx in an AdX Accordions. There are approximately six pen in each andarean. In each panel, I have an asp: GridView control that allows the site administrator to perform various tasks, to maintain the data. It looks good and works beautifully, but ... With grid view control, with each update, insert, etc., the erordine falls and opens the default panel. I suspect because the page is reloaded on a postback event. It's a big annoyance I've read that the appicier should be able to maintain the index of the open panel and return to that pane, but this is not happening with the GridView update. Any ideas on how to submit GridView to your insert, update, delete, etc. and to open that awards panel? Keep the Adrodian in the UpdatePanel and set the property update mode of the panel with "conditional".

== DropLogic project: Migrate ================================== ===== = Rack aborted! An error occurred, this and later the migration was canceled: Runtime Error: Failed to execute the statement for this reason: [IBM] [CLI driver] [DB2 / LNUX 8664] SQL0104 N An unlikely token "LIMIT" Was found after. The expected token may include: "First select FETCH & lt; n & gt; ROWS only" SQLSTATE = 42601 SQLCODE = -104: Select projects. Projects with WHERE projects.id & lt; 17 LIMIT 1 How can I fix this? DB2 LIMIT x does not support keywords. An error message says, the proper way to do this is to use FETCH FIRST x ROWS ONLY .

I have a left hand navigation within two iframes, between two items, switch between two pages sometimes There is also a white flash, sometimes it does not happen. In some ways I have tried so far: & lt; Iframe style = "visibleibility: hidden;" onload = "this.style.visibility = 'visible';" & Gt; did not move. jQuery ('# jobs-frame'). Load (function () {$ (this) .show ();}); JQuery ('# Primary A'). Click (function () {// Alert ('Hello'); jQuery ('# jobs-frame'). Hide ();}); Also did not move further. Whatever I have tried, it is old in any other way. What I am, is that many of these 2 solutions / comments are saying that they work, but in Chrome - the only browser I have tested so far - I still have this problem. If you want to avoid 'white flash', do not use links on HTML pages, But both pages have 2 & lt; Div & gt; Switch between s and them (this also allows for beautiful animat...

I want to be able to print a form from a form form application. Although this restriction is on the face that I have to print it on a pre-printed form with specific places for text and I should not overflow the text. Can WPF be a good idea for that to use? Or can be used for precise placement of the text on the paper, but any suggestion is to be printed at the same place regardless of the printer. Define and control the document layout to apply for the highest accuracy of a fixed document design or print device , Where "what you see is what you get" (WYSIWYG) is designed for applications. I believe this requires WPF, it's just one. NET class but there is no viewer for WinForms.

Is it possible to create an annotation (or some other way) to force the GWT compiler to not compile a method? is? I have a class that I also use on an app engine (in the shared folder) and only one server side is needed for a method that causes the GWT not to be compiled. I should ignore GWT method now (not appending). I either put an annotation, or pre-compilation script which erases the method before compiling. Both methods will work for me, it would be best if I still compile via Eclipse IDE. Anyone else thought or tried about it? Not yet. Very recently this kind of annotation was added to @ com.google.gwt.core.shared.GwtIncompatible ("Why Details ...") . It applies to classes or methods. But the patch code was not released yet! The official status is Fixed Not Related . And I personally can confirm that this is not in the current GWT version 2.5.1. I hope for the upcoming 2.5.2. See: Note, there is already the same annotation com In the .google...

I need to process a tree in different orders, assuming that both BFS and DFS both have a queue or a Using stack is easy, however, there is a proper Java interface available to me to do something queueOrStack & lt; N & gt; Pending = ... while (! Pending! ISet ()) {N node = pending.poll (); // & lt; ----- This problem is pending. All (node ​​children ()); Process (node); } There is no real problem, I have implemented ArrayList in implementing some line 1 Can I do though, am I sure I'm seeing something in the Java Store Framework or is it really missing? Use the latest-first comparator with or priority question , which may be a dumb idea. Such structure is there. It will be ArrayDek ->

This question is 'same', but I'm asking for alternative (if it exists). I have made a DB number with a collection number in the Mongo Shell. Use of Mongo as ODM I want to reach the collection and list of numbers var mongoose = expected ('mongos'), schema = Mongoose. Sema; Mongoose.connect ('MongoDB: // local host / Nums'); Mongoose.model ('number', new schema ({value: number})); Mongoose.connection.on ('open', function (ref) {console.log ('Mongo server to connect.');}); Mongoose.connection.on ('error', function (mistake) {console.log ('Could not connect to Mongo Server!'); Console.log (err);}); Var nums = mongoose.model ('number'); Nums.find ({}, function (mistake, data) {console.log (error, data, data. Length);}); To access a previously created database / archive, I have to always go through mongoose.model and new schema call ? Can this step bypass? Although this step is to be written on...

I am new to Perl to Win32: Oll module at the command prompt, I am trying to print MS Word table data row I am But I'm able to print the last line of the table. Can you help me solve this problem? thank you in advanced. Below is my code: #! Use / usr / bin / perl strict; Use warnings; File :: spec :: functions use qw (catfile); Use Win32 :: OLE qw (in); Use Win32 :: OLE :: Conte 'Microsoft Word'; $ Win32 :: OLE :: Alert = 3; My $ word = get_word (); $ Word- & gt; {DisplayAlerts} = wdAlertsNone; $ Word- & gt; {Visible} = 1; My $ Doctor = $ word- & gt; {Document} - & gt; Open ('C: \\ PerlScripts \\ myTest.docx'); My $ tables = $ word- & gt; Active document- & gt; {'Tables'}; For my $ table (in $ tables) {my $ tableText = $ table- & gt; ConvertText ({separator = & gt; wdSeparateByTabs}); Print "table:" $ TableText-> Text (). "\ N"; } $ Doc- & gt; Close (0); Sub get_word {my $ word; Eval {$ word ...

I have an ASP.NET MVC4 web application project in .NET 4.5 (VS 2012). It is in VB. It fails to load the name of System.Data.Linq name (with all sections and sub-namespaces) in the project is a reference set System.Data.Linq.dll. Any ideas where the problem is? When I try to add Linq2Sql classes, I receive such a warning: Specify the type specified in the namespace or import 'System.Data.Linq' The member is also not public or can not be found to make sure that the namespace or type is defined and it includes at least one public member, make sure that the name of the imported element does not use any aliases and such errors: System.Data.Linq.DataContext But this is just the beginning: if I'm from the name of System.Data.Linq If I try to use anything, I get an error, for example if I try to use System.Data.Linq.Mapping.DatabaseAttribute, I get such an error: type 'System.Data.Linq.Mapping.DatabaseAttribute' is not defined. I had this same prob...

I want to know how I can add these two resonents together: & Lt; PHP transcript $ _SESSION ['id']? & Gt; & Lt ;? Php echo $ sessionConcat? & Gt; I wanted to add echo to it so that inserted achi could be set to a variable, like $ assessment = // concatenated echo Is this what you are trying to accomplish? $ assign = $ _SESSION ['id'] $ SessionConcat;

I have a question that I would be happy to answer. I have two arrays, we say: string [] name = {"names names", "second name"}; String [] number = {"111 11 111", "222 22 222"}; I have to put two ListViews in one item in my ListView. (I tried to paint it with the picture). I f.ex. My name array in the list view with a simple lv.setAdapter (new array adapter & lt; string & gt; (this, R.layout.single_name, name); I have my.xml, single_name.xml and single_number.xml in my Layouts folder in my ListView. Since I am new to this site, I am not allowed to add a picture, I will try to describe it here: HEADER (item one) Name names 111 11 111 (item two) Second name 222 22 222 And it will continue on the basis of the quantity of contacts. Any help will be greatly appreciated :) Thanks Thanks advance! You also need to create a custom adapter and custom view to represent each row in your list. Will be. ...

I wrote a script that will go through all the databases in our database, verify that their website URL works , And find a Twitter link on your homepage. We have more than 10,000 URLs to verify, after a fraction of the URL verification, we begin to get getaddrinfo errors for each URL. Here is a copy of the code, which scraps a URL: def scrape_url (url) url_found = false twitter_name = zero start agent = Mechanize.new do | A | A.follow_meta_refresh = true end agent.get (normalize_url (url)) what to do Page | Url_found = true twitter_name = find_twitter_name (page) end @ er & lt; & Lt; "[# {@ Current_record}] Success \ n" Rescue exception = & gt; E @ er and lt; & Lt; "[# {@ On_runcord}] error (# {url}):" @ er and lt; & Lt; E.message @err & lt; & Lt; Note: I have also run a version of this code that creates a single mechanize instance which is shared in all calls to Scrap_Arl. It failed in the exact same way. When I run it on EC2, ...

How can I draw horizontal zebra lines on my form? 1px black 1px white 1px black 1px white 1px black 1px white 1px black 1px white You can do it in this way: For the new Jackson as J (M. Wide, M. Heights) y = 0 Zebra for. For height - 1x = 0 for Zebra. With 1 if Y mode 2 & lt; & Gt; 0 Then Zebra Satpixel (X, Y, Color Black) and Zebra. Satpixel (X, Y, Color White) End if Next Next Me Background Image = Zebra (1px line)

Is pinline style layout / stacking of items on a page with CSS possible? I think there might be something like this in CSS3 which can do this type of layout with columns. I have already read a tutorial, but it requires stacking javascript and full position. You can use the CSS3 column. It will pile up stacked objects. div.pinterest {width: 400px; Column-count: 4; Column-Difference: 0; } Div.pinterest & gt; Div {Display: Inline-Block; Vertical-alignment: top; Width: 100px; }